Codelocks KL1000 KitLock NetCode Locker Lock Manuel d'utilisateur télécharger pdf

Step 1 Remove existing cam lock.

Step 2 Place the 16mm (

") template

hole over the hole left by the

cam lock and mark the upper

fixing hole.

Step 3 Drill the 6mm (

") fixing hole.

Step 4 Fit the KitLock to the door by

passing the spindle through

the 16mm (

") hole.

Step 5 If required, from the inside of

the door, pass either of the

packing pieces over the

spindle to centralise the lock.

Step 6 Now secure the lock by threading

the large nut onto the spindle.

Step 7 Fit one of the upper fixing bolts

to suit your door thickness.

INSTALLATION GUIDE

Replace existing cam lock with KitLock

New Installation

Step 1 Place template on door and

mark upper 6mm (

") hole

and lower 16mm (

") hole.

IMPORTANT NOTE: Before

drilling fixing holes, please

ensure the position of the

KitLock when fitted will allow

enough clearance for selected

cam to work.

Step 8 Tighten the lower fixing nut

and upper bolt.

Step 9 Select the cam which suits

your door and frame and

attach it to the square shaft at

the end of the spindle.

Step 10 Now check the operation of

the lock using the factory

User Code 22 44.

Step 11 If the lock is functioning

correctly, CHANGE THE

DEFAULT MASTER

CODE 11 33 55 77 and

DEFAULT USER CODE

22 44 and program the

lock using the programming

and operating instructions

enclosed.

Step 2 Drill both fixing holes.

Step 3 Continue installation from

step 4 to 11, above.

Installation

Instructions

II-KL1000LH-v1:0213

II-KL1000-v2:0813

Vertical

KL1OOO

CODELOCKS LTD UK

Tel: +44 (0) 1635 239645

Fax: +44 (0) 1635 239644

[email protected]

Helpline, service & spares

FREEPHONE 0800 393405

CODELOCKS INC US

Tel: +1 714 979 2900

Fax: +1 714 979 2902

[email protected]

KitLock is a

Codelocks Ltd Brand

www.codelocks.com

1 2

Résumé du contenu

Page 1

Step 1 Remove existing cam lock.Step 2 Place the 16mm (5/8") template hole over the hole left by the cam lock and mark the upper fixing

Page 2

SPECIAL NOTES FITTING INSTRUCTIONSThe KitLock can be tted to:A Cabinets, cupboards and lockers etc as a direct replacement for existing cam locks.B

Plus de documents pour Sécurité CODELOCKS KL1000 KitLock NetCode Locker Lock

Voir le document Codelocks KL1000 KitLock NetCode Locker Lock Manuel d'utilisateur

Codelocks KL1000 KitLock NetCode Locker Lock Manuel d'utilisateur (2 pages)

Commentaires sur ces manuels

Pas de commentaire

Codelocks KL1000 KitLock NetCode Locker Lock Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Sécurité Codelocks KL1000 KitLock NetCode Locker Lock. Codelocks KL1000 KitLock NetCode Locker Lock User Manual [en] Manuel d'utilisatio

Résumé du contenu

Plus de documents pour Sécurité CODELOCKS KL1000 KitLock NetCode Locker Lock

Commentaires sur ces manuels

Produits connexes et manuels pour Sécurité Codelocks KL1000 KitLock NetCode Locker Lock