Codelocks Upgrade - Audit Trail Kit for CL5010 Manuel d'utilisateur télécharger pdf (Page 5)

3. Removekeyfromcylinder.Holddownthecontrolpininthe

endofthecylinderandunscrewthecap.

4. Replacethetailpiece,holddownthecontrolpinandscrew

thecapfullyonwithouttightening.Ensurecontrolpin

projectstolockthecap.

5. Testthekeyoperation.Ifthekeyisdifficulttoinsertortight

whenturning,thenthecapmaybetootight.Loosenthecap

onenotchatatimeandtrythekeyagain.Ifthekeyinserts

andturnsOK,butisdifficulttoremove,thenthecapmaybe

tooloose.Tightenupthecaponenotchatatime.Adjustthe

capuntilthekeyinserts,turnsandremoveseasily.

6. Withkeyturned90ºclockwisereplacecylinder,cylinder

coverandhandle.

CAUTION! DO NOT INSERT THE KEY IN THE CYLINDER

ONCE YOU HAVE REMOVED THE SCREW-CAP

3 4

5-6

1 2 3 4 5 6 7 8 9 10 11 12

Pas de commentaire

Codelocks Upgrade - Audit Trail Kit for CL5010 Manuel d'utilisateur Page 5