CODELOCKS 5OOO ELECTRONIC Manuel d'utilisateur télécharger pdf (Page 18)

41mm (1

/8”)

1 Cabinet lock

2 Gasket

3 Upperfixingboltsx3(1spare)

4 Cam spindles x 4

5 Cams x 2

6 Cam fixing bolt

Cabinet Lock CL1200

Technical Speciﬁcations

Power 2 x 1.5v AAA cells

Operations 80,000 openings.

Low battery The lock will signal low battery

to the user via the red LED

ﬂashing. The lock will open

100 more times after this signal

is initiated. The non-volatile

memory retains settings when

batteries are changed.

Battery failure override

The Cabinet Locks have been designed so an

external PP3 battery can be placed against the

external contacts and using master code to

gain entry.

External dimensions

Length 141mm (5

/8”) x width 41mm (1

/8”)

x depth 38mm (1

/2”) to top of handle.

Material Zinc Alloy

Cam ﬁxing point 8mm (

/16”) square

Door thickness The CL1200 is supplied with 4

spindles to suit door between

¼” or less up to 1” or less.

See item 4.

Buttons Individual stainless steel

buttons. Audible button press.

Finish Silver Grey

Auto-unlock feature: The lock can be

programmed via the master code to auto open

after a preset time, 2, 4, 6, 8, 12 hours (locker

mode only).

IP rating IP54 (when ﬁtted with

optional gasket)

For internal use.

CODES

Programming information

The Cabinet Lock has three code levels available:

i) Master Code

ii) Sub-Master Code

iii) User Code

The Cabinet Lock is supplied with two factory

set codes:

Master Code: 11 33 55 77

User Code: 22 44

 •WhenttedimmediatelychangetheMaster

Code and User Code.

 •AllMasterCodesandSub-MasterCodes

are 8 digits long – 100,000,000 code

permutations.

 •AllUserCodesare4digitslong–10,000

possible code permutations.

 •Thelock‘open’timeissetat4seconds.

FUNCTIONS

Before programming select the most appropriate

function for the application.

A) Repeat code mode

Important Note: This is the default function and

is already pre-programmed in new locks. This is

the most common function and is used where the

same code will be repeatedly used.

B) Single use code mode (locker mode)

The User enters a single use code which will lock

and then open the lock once only and then be

erased. This function is used for short term, multi

occupancy applications e.g. a locker in leisure

centre.

The lock will now remain open until the next single

use code is entered into the lock

OPERATING INSTRUCTIONS

Note: The Cabinet Lock has a 10 button

keypad and a CODELOCKS.COM button. This is

used when programming and is found behind

the handle.

The lock has the following code levels:

Master Code can:

Open the lock

Change the Master Code

Set / Change / Delete the Sub-Master and

User Code, Select between repeated use and

single use codes and Restrict the locked time.

Sub-Master Code can:

Open the lock

Change the Sub-Master

Set / Change / Delete the User Code

User Code can:

Open the lock

Change the User Code

A same code cannot be programmed into

more than one level

CL1200

Codelocks2010-A5-Inner.indd 34-35 17/2/10 09:20:15

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 28 29

Commentaires sur ces manuels

Pas de commentaire

CODELOCKS 5OOO ELECTRONIC Manuel d'utilisateur Page 18

Commentaires sur ces manuels