CODELOCKS 5OOO ELECTRONIC Manuel d'utilisateur télécharger pdf (Page 24)

Front depth off door: 58mm (2

1

/3”)

Codelocks CL400 Range

Technical Speciﬁcations

Door thickness 35mm - 65mm (1

3

/8”-2

1

/2”)

Spindle type 2 part 8mm (

5

/16”) spring loaded

spindle

Body material Zinc alloy

Non handed Lock will ﬁt doors hung on the

left or right

Mortice Latch (CL410 & CL415)

Medium duty, stainless steel latchbolt head with

“anti” shim deadlocking plunger, 8mm (

5

/16”)

follower.

60mm (2

3

/8”) backset, requires 25mm (1”) hole,

82mm (3

1

/4”) deep.

70mm (2

3

/4”) backset, requires 25mm (1”) hole,

92mm (3

5

/16”) deep.

Mortice Lock (CL420 & CL425)

Euro proﬁle mortice sash lock with deadbolt

and latchbolt. Complete with double cylinder

to control deadbolt and to retract latchbolt.

With the deadbolt locked it denies access to a

code user. The key can be used to open doors

for management functions such as security

and cleaning. The split follower enables the

inside lever to retract the deadbolt and latch to

prevent accidental lock in when the deadbolt

is thrown. Supplied with double euro proﬁle

cylinders with three keys. May be ordered

keyed alike.

Code Free access option via keypad on models

CL405, CL415 & CL425.

Codes

8,191 non sequential codes available

Code storage

Single code

Code change method

Requires removal of lock from door

Finishes available

PVD (Physical Vapour Deposition) hardwearing

low maintenance ﬁnishes SS (stainless steel)

and PB (polished brass).

Neoprene seals are included on both sides to

provide friction against the face of the door

and to prevent damage from over tightening

of the ﬁxing bolts. The outside lever handle

has a slipping clutch to prevent damage to

the lock if the handle is forced.

For internal and external use.

CL410 Mortice Latch

Outside lever handle will retract the latch after

a correct code is entered. The spring loaded

latchbolt will lock automatically when the door

is closed.

CL415 Mortice Latch

As CL410 with Code Free access option on

keypad. In Code Free mode the outside lever

will retract the latchbolt without using a code.

CL400 Front & backplates only

NOT ILLUSTRATED

For use with existing lock or latch.

CL405 Front & backplates only

NOT ILLUSTRATED

With Code Free access, for use with existing

lock or latch.

NB: For CL400 & CL405 existing lock must

have 22mm (

7

/8”) ﬁxing hole below follower

(spindle).

CL420 Full Mortice Lock

with Safety Feature

Outside lever handle will retract the latch after

a correct code is entered. The spring loaded

latchbolt will lock automatically when the

door is closed. Key retracts latchbolt for entry

without using a code. Key controls deadbolt

position. When deadbolt is projected it denies

access by code. When deadbolt is projected

the safety feature allows the inside lever handle

to retract the deadbolt and the latchbolt,

preventing people being accidentally locked in.

CL425 Full Mortice Lock with Safety

Feature

As CL420 with Code Free access function

on the keypad. In Code Free mode the outside

lever will retract the latchbolt without using

a code.

Back to Back

NOT ILLUSTRATED The CL410 (Mortice Latch)

may be ordered with two keypad plates for

installation on both sides of the door to provide

coded access in both directions. Stainless

Steel ﬁnish only

CL410

CL415

CL420

CL425

46

Codelocks2010-A5-Inner.indd 46-47 17/2/10 09:20:30

1 2 ... 19 20 21 22 23 24 25 26 27 28 29

Commentaires sur ces manuels

Pas de commentaire